MetalForm China

This will be held on site during the exhibition, at which hundreds of the latest technology and products from metal forming industry will be introduced. Please contact with magazine@chinaforge.org.cn.

TPP-MetalForm Conference held on site is the pioneering work of MetalForm China, which has been widely imitated by other exhibitions. The main function of the conference is to provide a platform for free communication and learning each other for the visitors and exhibitors through audio-visual forms. This platform is extremely effective. It greatly reduces the difficulty of audience participation, greatly improves audience selection and the effect of communication. For this reason, once the conference was held, it was welcomed by all participants, including exhibitors. The situation is as follows:

Publisher: All exhibitors have the right to release technology and equipment, and non-exhibitors (absent exhibitors) including independent researchers and research institutions are also welcome to release their achievements or products. Depending on the content, some non-exhibitors (absent exhibitors) need to pay the organizer for publishing.

The way of Release:  Relevant equipment and technology introduction videos and PPT can be submitted to the Organizer, and the Organizer will roll them across relevant screens and conference yards on site. All released videos must be submitted to the Organizer, and can only be broadcast in the publicity yards in the exhibition hall after being reviewed, approved and completed. You can also give a speech on the spot. The speech is divided into two or three places according to the content. Forging and the related to forging, pressing & stamping and die & tool and the related to Pressing & stamping and die & tool, as well as sheet metal & fabricating and joint & welding and the related to sheet metal& fabricating and joint & welding.

Requirements of the Content: Introduction to the product and technology, and their developments, or introduction to a technical development in the industry. Don't accept too many general statement of the company.

The time of each speech shall not exceed 25 minutes, and the Organizer has the right to adjust and make decisions on the order and actual time of the speech according to the content and time. The speech may also be rejected.

Due to the limited number of speeches / lectures, the registration must be fast and must be done 45 days before the date of the exhibition opening day, and otherwise it is not guaranteed to be arranged.

In order for the speech/lecture to be published in the< Guide to Visitors > and < Preview > before the exhibition, please submit your speech/lecture in advance. The submission time shall be no later than 45 days before the exhibition opening day. In addition, if submitted in advance, the Organizers will supply the additional publicity with Wechat, websites, magazines and posters.

Date:  June 17-20, 2025

Venue：National Exhibition and Convention Center (Shanghai)

Style：

The conference is as an open report meeting held at the exhibition site, with free participation of visitors and exhibitors. Exhibitors will release technologies and products free of charge, and non-exhibitors （absent exhibitors） or potential exhibitors will need to pay for the releasing the their products and technologies.

Content & Topics：

Forging

• Billet preparation, test & inspection.
• Equipment, auxiliaries (including maintenance & repair) .
• Die & lubrication.
• Automation, digitalization, informatization.
• Heating & heat treatment, energy saving and green manufacturing.
• Typical forging forming process.
• Materials, support materials and consumables.
• Light weight and forging.
• Layout of workshop, storage, transfers inside.
• Management, market and operation.
• Modern forging.

Pressing & Stamping

• Light weight to Pressing & Stamping, and test & inspection.
• Automation, digitalization, informatization.
• Servo pressing, hot stamping and hydro forming.
• Application of Robot and laser technology.
• Tooling and sensor for die & tool.
• Equipment, auxiliaries (including maintenance & repair).
• Fine blank, high speed stamping, special pressing & stamping.
• Metals forming.
• Sheet & plate, blanking, support materials and consumables.
• Surface treatment for Sheet & plate and components (including painting) .
• Layout of workshop, storage, transfers inside.
• Management, market and operation.
• Modern pressing & stamping.

Sheet Metal & Fabricating

• Laser, plasma, water and flame cutting.
• Test & Inspection.
• Servo CNC turret and punches.
• Flexible lines and application of robot.
• Spring making and metals forming.
• Tube/pipe working.
• Servo bending and tools.
• Automation, digitalization, informatization.
• Sensor and application of manipulators.
• Equipment, auxiliaries (including maintenance & repair).
• Cleaning and grinding, surface protection and treatment (painting).
• Sheet & plate, blanking, support materials and consumables.
• Layout of workshop, storage, transfers inside.
• Management, market and operation.
• Modern sheet metal & fabricating.

Joint & Welding

• Rivets and rivet manufacturing.
• Adhesive materials and machinery.
• Laser welding.
• Electric and plasma welding, etc.
• Automation, digitalization, informatization.
• Application of robot.
• Fixture & tools for welding and joint.
• Welding materials-rod and wire.
• Influence of modern technology on welding and joint.
• Leaning, grinding and treatment of welds and joints.
• Auxiliaries of welding and joint
• Layout of workshop, storage, transfers inside.
• Modern welding and joint.

Die & Tool

• Die materials, operation and failure and working life.
• Tool & die making, surface conditioning.
• The Structure of the die & tool, standardization and personalization.
• Panel die and stamping process.
• Deep drawing die and process, drawing pad.
• Digitalization test of die & tool.
• On line monitoring of die stress and strain.
• Digitalization and informatization.
• Operation and maintenance & repare.
• Die & tool repair technology – welding surfacing/built-up welding and modular design.
• Quick change system.
• Storage, transfers inside.
• Modern technology VS. die & tool

Precautions for registration:

1. Exhibitors, interested in participating in this conference, please fill in carefully ↓Application Form of TPP-MetalForm China , and sent it to:

Form Press, INC.

Confederation of Chinese MetalForming Industry

10/F Boya Tower C, Zhonguancun Life Science Park, Beiqing Rd.,

Changping, Beijing 102206, P. R. China.

Tel:：+86 10 5305 6669

Fax： +86 10 5305 6644

Email：magazine@chinaforge.org.cn

2. Non exhibitors (absent exhibitors) who intend to participate in this conference need to pay CNY15.000, 00 for the release fee, please fill in↓Application Form of TPP-MetalForm China , and sent it to:

Form Press, INC.

Confederation of Chinese MetalForming Industry

10/F Boya Tower C, Zhonguancun Life Science Park, Beiqing Rd.,

Changping, Beijing 102206, P. R. China.

Tel:：+86 10 5305 6669

Fax： +86 10 5305 6644

Email：songzhongping@chinaforge.org.cn

Note: non exhibitors (absent exhibitor) are welcome to participate in the press conference, but the release fee should be paid before. The exhibitors take the release free of charge. Please Pay a special attention when filling in ↓Application Form of TPP-MetalForm China.